What Is It?

Discussion in 'Electrical' started by 90FXRS, Sep 7, 2013.

  1. 90FXRS

    90FXRS Junior Member Contributor

    419
    28
    6
    A friend of mine has an 07 Injected Fatty. There is a connector hanging by the rear of the intake. Has a plug in it.....What Is It? I will get a pic tomorrow.

    The scooter runs fine. Just wondering what it is. As far as I know there have been no mods done to the bike
     
  2. Bodeen

    Bodeen Well-Known Member Staff Member Moderator Contributor

    4,310
    73
    130
    Battery Tender, Heated clothing?
     
  3. Chopper

    Chopper Senior Member

    1,632
    48
    18
    Just a guess, Harley uses the same wiring harness for HDI models and US models, HDI models use a intake solenoid that connects to the back of the stock backplate, on US models the intake solenoid connector is caped off, when you upgrade to a free breathing air filter on a US bike the connector should be strapped off to something so it not just hanging there.
     
  4. blademan

    blademan Active Member

    179
    26
    0
    This is what I was thinking also.

    Good to see you Chop.
     
  5. 90FXRS

    90FXRS Junior Member Contributor

    419
    28
    6
    Thanks for the replies. I did notice there is a plastic anchor attached to it and the length of it limits where it could possibly go.