wet 2000 flhtci

[native53]

Bought a 2000 flhtci, started having electrical problems I changed the temp sensor, mechanic changed the cam and crank sensor cause the ECM threw those codes....ran fine for awhile then I washed the bike runs rough will not idle, engine light stays on,will not read codes until the bike drys out 2 days later? :dknow

 

[native53]

I forgot to mention I also loose tach and when you hit the front or rear brake the tach moves when the bike dries out everything is normal....ride a dirty bagger or stay out of the rain?

 

[Jack Klarich]

Disconnect the battery, unplug the ECM. use contact cleaner, let dry good. Apply some dilectric grease and reconnect. Same on battery

This is the same produdt