Visor & trim

Discussion in 'Softail Models' started by kardar, Mar 2, 2009.

  1. kardar

    kardar Member

    26
    11
    0
    Hi

    I want to add visors to my Head light & running lights. Do I need to change the stock headlight & running light trim to do this.
    Bike is 02 Heritage
    Thanks,
    Kardar
     
  2. glider

    glider Veteran Member

    25,464
    108
    44
    Unfortunately they make a ring that is a bit different to accept the visors. You could probably modify the ones you have now to get them to do the job.
     
  3. kardar

    kardar Member

    26
    11
    0
    Thanks Glider

    I may have to do that, trimming costs as much or more than the Visors :-(
     
  4. ZIGZAG

    ZIGZAG New Member

    3
    11
    0
    The visors that i got from the dealer fit without any mods.It took about 20 minutes to install them,they just fit under the factory trim ring. hope this helps you.
    ZIGZAG
     
  5. Fatboy07NH

    Fatboy07NH Banned

    48
    0
    0
    Yup I got the same visors as Zigzag. They work well and look good.
     
  6. kardar

    kardar Member

    26
    11
    0
    Hi ZIGZAG

    Can you tell me the make, model of the visors you got. It was actually the dealer who told me that I need to change the trim also.
    Thanks,
    Kardar
     
  7. little_earl

    little_earl Active Member

    144
    26
    0
    I have the Willie G visors (head lamp; passing lamps; and turn signals) I had to buy special trim rings for the passing lamps. Getting the ring on the headlamp was a buger though. Took about 45 min. just for this one. :small3d012:
     
  8. rembrandt41

    rembrandt41 New Member

    1
    11
    0
    I have an 08 Heritage and the visors were easy and I can't get the one on the headlamp to have the trim ring fully seat, how did you get your trim ring to seat fully?