Upgraded exhaust and A/C - now I need a fueler!

Discussion in 'TFI Settings' started by TQuentin1, Aug 4, 2015.

  1. TQuentin1

    TQuentin1 Well-Known Member Staff Member Moderator

    4,633
    83
    100
    OK. So this past weekend (4,340 miles) I did the following:

    • Replaced OEM air cleaner with SE Stage 1 A/C 50mm Kit (29260-08)
    • Replaced OEM head pipe with Powerflex Header (American Custom Exhaust Systems)
    • Replaced OEM mufflers with SE Thunder Slip-on 3 1/2" Mufflers (65115-10)

    Now I need to add a fueler. I am going with the Dobeck EJK Fuel Controller - GEN 3, Part Number: 9120333. Should be just what I need until I add cams.

    Cheers,

    TQ
     
  2. Dan.1977P

    Dan.1977P Active Member

    258
    38
    2
    If you know you're doing more work, why not spend a couple hundred more now to avoid spending it later?
    [​IMG]
     
  3. TQuentin1

    TQuentin1 Well-Known Member Staff Member Moderator

    4,633
    83
    100
    Could be a while from now, and I don't have time to fiddle with an SEPST or similar. Looking at the time and effort guys are putting into the more high-tech tuners (rather than fuelers), the Dobeck unit meets my immediate needs to richen up the AFR.

    Cheers,

    TQ
     
  4. Dan.1977P

    Dan.1977P Active Member

    258
    38
    2
    Understood.
     
  5. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    Good choice for now plus the discount, after cams a SERT or other that you can set timing would be nice:s