Turn signal relocation (Front)

Discussion in 'Dyna Models' started by cyborg, Feb 4, 2015.

  1. cyborg

    cyborg Active Member

    242
    28
    1
    I`m looking for Front turn signal relocation kit. How do I find out what size forks i have? There showing 39mm and 41mm and 49mm :newsmile108: Can`t find anything in the shop manual about the size.
     
  2. Jeff Klarich

    Jeff Klarich Well-Known Member Contributor

    3,593
    103
    296
    I believe they are 49mm. That's what the book says.
     
    Last edited: Feb 4, 2015
  3. Bodeen

    Bodeen Well-Known Member Staff Member Moderator Contributor

    4,310
    73
    130
    My deduction from the 2009 Service Manual. It calls for B-45305 fork seal driver. Everything I could find says this driver is 49mm. That doesn't mean that it is but thats what I could come up with.......
     
  4. Breeze3at

    Breeze3at Well-Known Member

    4,643
    83
    123
    2009's are 49mm like Jeff and Bodeen said.
     
  5. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    I believe ALL Dynas were upgraded to 49 mm in 06
     
  6. cyborg

    cyborg Active Member

    242
    28
    1
    Thanks guys:bigsmiley21:
     
  7. Hobbit

    Hobbit Active Member

    105
    26
    1
    yup 49mm whats on my Dyna
     
  8. cyborg

    cyborg Active Member

    242
    28
    1
  9. Breeze3at

    Breeze3at Well-Known Member

    4,643
    83
    123
    The pinch bolts are different. Probably because of the change from 41mm to 49mm requires a different length (longer).