Startmotor

Discussion in 'FXR Models' started by Pete71, Jan 30, 2016.

  1. Pete71

    Pete71 Member

    20
    3
    2
    Hi again,now i got a new problem.
    I'm tring to get my startmotor off but it aint getting anywhere just wiggling abit, I have looseing the 2 bolts and also got the Axel of with the little small cogg that goes on the clutchweel. The starter is the one with separate solenoid side by side. Sorry for the bad English and typos :)
    And have trying to find videos etc.. on the net but without any results
     
  2. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    un bolt the solenoid
     
  3. Pete71

    Pete71 Member

    20
    3
    2
    I did and the arm that goes to the starter axel
     
  4. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    Some FXR models had a ground strap from the starter that bolted on under the primary, have a look
     
  5. Pete71

    Pete71 Member

    20
    3
    2
    alright thx , I will have a look tomorrow
     
  6. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    Here is an exploded view of your starter, if yo have all the wires off and the jack shaft off it should come out
    [​IMG]
     
  7. Pete71

    Pete71 Member

    20
    3
    2
    Thx Jack , but its not that starter model i got.i have the one with the solenoid separate side By side with the starter nad theres no straps on it but i hope i can now change my oil lines from the filterunit By taking of my rear wheel and then can let the starter be on its place
     
  8. Pete71

    Pete71 Member

    20
    3
    2
  9. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    Does it look like this? If it does your starter and primary are older than 91
    [​IMG]
     
  10. Pete71

    Pete71 Member

    20
    3
    2
    Thats the one i have,