starter bushing

Discussion in 'Softail Models' started by dhorne, Jul 19, 2010.

  1. dhorne

    dhorne Active Member

    258
    26
    0
    I am in venezuela and i cannot get a bushing for the starter in the inner primary , in the book there is two one for the inner and one for the outer , I can get them made by a machine shop here but have not got the bike with me at the moment for the sizes , could anyone happen to know the sizes of these so I can get them made??

    All / any help would be muchly appreciated

    thank you
    Darren
    the bike is a 2002 Heritage
     
  2. glider

    glider Veteran Member

    25,464
    108
    44
    Don't know the sizes offhand but keep in mind that there are TWO different sized bushings in the outer primary cover (depending on the year and model) so the right size info is important here.
     
  3. dhorne

    dhorne Active Member

    258
    26
    0
    Man that was a quick response , yes I might as well get them all made and do it right
    thanks
     
  4. glider

    glider Veteran Member

    25,464
    108
    44
    Sorry it took so long:bigsmiley20:

    Do it once and do it right. Measure what you need first.
     
  5. dhorne

    dhorne Active Member

    258
    26
    0
    this bushing is for the inner primary , it was completely gone , there is a lip in there i wonder if that was made from the last part of the bushing before it was completly gone or if that is a lip it sits in....
    I would suspect the bushing was made to cover the whole indent

    thanks Glider
    regards
    Darren