speedometer

Discussion in 'Electrical' started by lambigdaddy, Mar 21, 2009.

  1. lambigdaddy

    lambigdaddy New Member

    2
    11
    0
    my speedo stopped workin i cleaned sensor still does not work my codes all read clr exept 2 and 8 it reads set what does that mean or how do i set it thanx alot mike
     
  2. glider

    glider Veteran Member

    25,464
    108
    44
    Depending on the miles on the bike, when they go out, it has to be replaced with a new one, cleaning just doesn't make it.

    The display is pretty much normal.
     
  3. lambigdaddy

    lambigdaddy New Member

    2
    11
    0
    11,ooo miles on the bike when i took it out the sensor was clean. its manetic right?if it was working would there be metal dust on on it?just want to be sure before i buy a part i dont need. i checked the connection it looks ok thanx for all your help mike
     
  4. glider

    glider Veteran Member

    25,464
    108
    44
    Yes, it's magnetic, It registers the teeth passing by the face of the sensor.