sparking problem

Discussion in 'Electrical' started by mikke, Oct 16, 2008.

  1. mikke

    mikke New Member

    0
    10
    0
    can anyone tell me. what is what.
    i have a flhc 1450.
    the problem is starting lol no spark
    i have the twin ignition pack obviously.
    id like to know what wire should be getting what.
    there are 3 wires going into the pack.
    one is fat and live. the others do nothing.
    unless cranking. then one flashes negative rapidly ?
    help !
     
  2. hntwrobin

    hntwrobin Active Member

    236
    26
    0
    What year bike? It could be the bank angle sensor, the crank position sensor or the cam position sensor. I had this happen on my 99 Road king one time it was the bank angle sensor and the second time it was the crank position sensor. If it is the bank angle sensor and you have a stock ignition module you can unplug the bank angle sensor and the bike will start.
     
  3. Bubbaglide

    Bubbaglide Member

    67
    16
    0
    Robin , where is the bank angle sensor? Can you ride without it permanently? Is it like ecvery other part, costing big bucks?

    Thanks

    Bubba
     
  4. hntwrobin

    hntwrobin Active Member

    236
    26
    0
    You have an EVO engine? If so that changes things Is this on the 95 FL?