SE Ventilator a/c breather bolts?

Discussion in 'Engine, Fuel and Exhaust' started by Xrider, Mar 25, 2010.

  1. Xrider

    Xrider Member

    7
    0
    0
    The screamin' eagle ventilator kit for an 09 touring bike replaces the hollow bolts and breather tubes with sold breather bolts? The sold bolts are shown in the instructions, so they are the correct bolts. How does it now vent?
     
  2. glenreeder

    glenreeder Member

    92
    16
    0
    When I purchased the SE Air filter for my 09 SG the directions said to use the stock breather bolts.
     
  3. Xrider

    Xrider Member

    7
    0
    0


    I see. For the Ventilator is says the only thing to keep is the button head screw and discard everything else. There are new breather bolts that are seemingly solid but another forum mentioned that then are open in the back with a hole at 90 degrees half way through on the sides to breath...

    There is an new oil leak under the engine since installing the new a/c...
     
  4. EVGHOG

    EVGHOG Member

    12
    11
    0
    I did the same thing and the bike ran terrible...You have to use the stock breather bolts with the Screaming Eagle kit.