S &S Carb rebuild problem

Discussion in 'Engine, Fuel and Exhaust' started by FemurFracture, Aug 5, 2007.

  1. FemurFracture

    FemurFracture Member

    5
    11
    0
    Can anyone point me to a clear, detailed, diagram of an S & S carb in like an exploded view? I rebuilt my carb but my plate doesn't snap back and I suspect it's the spring position opposite the throttle cable side. I can't get the spring set in the proper position. Thanks.
     
  2. glider

    glider Veteran Member

    25,464
    108
    44
  3. FemurFracture

    FemurFracture Member

    5
    11
    0
    I sure didn't Glider sorry. It's a super e. Thanks for the link I already came across those but I can't get a good look at the side that's giving me the problem though. It's the spring on plunger side opposite the throttle cable side I just can't figure it out. I have one of the spring hooks where I think it's supposed to go but the other hook is just kind of floating not catching on anything.
     
  4. glider

    glider Veteran Member

    25,464
    108
    44
    Maybe this will help you out?

    [​IMG]