Road King security system

Discussion in 'Touring Models' started by DONNA BOWNDS, Sep 27, 2009.

  1. DONNA BOWNDS

    DONNA BOWNDS New Member

    1
    1
    0
    Can anyone help unlocking a security system - away from home & owner's manual
     
  2. oldgeezer

    oldgeezer Active Member

    238
    26
    0
    Did you set up a password in the system when you got the bike?
    If you did then...

    1. turn your ignition switch on then within two seconds press and hold both signal switches until the security light flashes rapidly.

    2. press the left signal the correct number of times to enter the number that you want to enter (press three times =the number 3)

    3. press the right hand signal switch one time to move to the next number that you need to enter.

    4. continue this process to enter the five number password that you set up.
     
  3. Tadaaa

    Tadaaa Member

    32
    16
    0
  4. futurerider

    futurerider Active Member

    252
    38
    2
    If you did not set the code, follow the instructions in previous post's, but use the code 0,0,0,0,0.

    Good luck
     
  5. glider

    glider Veteran Member

    25,464
    108
    44

    How would you set a "0" using the directional buttons?

    I would LOVE to see you do this.:D
     
  6. futurerider

    futurerider Active Member

    252
    38
    2
    Well darn Glider, good question.......HMMMM..... I believe the first digit blinks between "_ and 0" and the rest are blank.
    I would consider the _ a "0". But now what?????? Right, right,right, right, right?
    I bet that works if you did not enter a new code.
    Got me thinking now, thanks
     
  7. glider

    glider Veteran Member

    25,464
    108
    44
    I think you should stick to your plumbing:D
     
  8. futurerider

    futurerider Active Member

    252
    38
    2
    :yeahright Harsh, but okay :)

    Was my advise correct?
     
  9. glider

    glider Veteran Member

    25,464
    108
    44
    Maybe for you :D but I still wouldn't advise to use a "0"