Road King rear axle

Discussion in 'Touring Models' started by larry bart, Jan 21, 2010.

  1. larry bart

    larry bart Member

    24
    11
    0
    I have a 2007 RK Classic and a Bud gave me a IDS rear pulley off a 08 Bike.Are the 07 and 08 axle size the same?
     
  2. Bud White

    Bud White Well-Known Member Retired Moderators

    3,270
    48
    2
    no the 08 uses a 25mm axle and bearings... 07 is a 1" bearing and axle ids will fit 07 wheels as i used a set of 07 mags to put on my 08
     
  3. larry bart

    larry bart Member

    24
    11
    0
    so would I replace the bearing on the pulley with a 1 inch to fit on 07
     
  4. Bud White

    Bud White Well-Known Member Retired Moderators

    3,270
    48
    2
    if you can find the bearing yes but you have to have it pressed in and out and they are about 60$ for the IDS bearing
     
  5. Breeze3at

    Breeze3at Well-Known Member

    4,645
    83
    124
    Larry; Look in self help section under Transmission/clutch/drive, tip #50. Glider has everything (I think) that you need to know about this.
     
  6. larry bart

    larry bart Member

    24
    11
    0
    I do believe the info is there but I just got the Motor started and can't acess the jnfo Thanks