personal code disarming

Discussion in 'Electrical' started by stevenazile, May 5, 2008.

  1. stevenazile

    stevenazile Member

    7
    11
    0
    I successfully married the TSSM to my 2006 flhtcu and it works fine with the button fob. But I cannot get the personal code to disarm the alarm. I followed the directions, and it accepted and acknowledged the code I entered. As per the instructions I put the switch to accessory and pressed both turn signal switches at the same time and the alarm icon flashes 3 times per second as it should but that is as far as it goes. I cannot get it to get to the point where you can put the code in to disarm. Am I missing a step, any suggestions would be appreciated.
     
  2. glider

    glider Veteran Member

    25,464
    108
    44
  3. stevenazile

    stevenazile Member

    7
    11
    0
    I used the same as you have here but with no success.
     
  4. glider

    glider Veteran Member

    25,464
    108
    44
    It should work and timing is everything. Sometimes it takes a few tries till you get the hang of doing it before it works. You have to be fast.