Passenger Backrest Mechanism Custom Cover

Discussion in 'Trikes' started by zoood, Feb 18, 2013.

  1. zoood

    zoood Junior Member Product Contributor

    663
    28
    5
    On my first attempt I had made this metal enclosure to cover over the back mechanism for the passenger's back rest.

    [​IMG]

    [​IMG]

    Here's another view, Even though it came out pretty nice. It just didnt flow along with the rest of the trike's looks. So decided to change it out.

    [​IMG]

    This is a Harley horn cover that I removed the internal brackets and the horn. I glued rubber "U" channel to the covers edges that would butt against the passenger's backrest's vinyl covering. I had also drilled 3 holes in the surface. The two outside ones are for mounting the cover and the center one is for a cosmetic concho that I added the POW MIA emblem too. i found that during my Trike Build. If you reuse Harley parts instead of store bought aftermarket parts. Your build will blend together by complementing the originality of your build.

    [​IMG]

    As you can see,... the chrome horn cover flows along much better with the trike's theme. I had attached a POW MIA emblem onto a barbed wire concho and mounted that to the horn cover. Maybe less riders will ask if I put my horn back there. lol
     
  2. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    :s Very nicely done:s