Ok and the next question is:...

Discussion in 'General Harley Davidson Topic' started by Fourdogs, Aug 18, 2008.

  1. Fourdogs

    Fourdogs Junior Member

    805
    28
    3
    When removing screws or bolts that have been treated with thread locker....such as Loctite or Permatex....what product will clean the threads. Or should these screws and bolts be disguarded. Thanks in advance.
     
  2. Block Head 96

    Block Head 96 Account Removed

    124
    0
    0
    Wire wheel, wire brush. I'm sure a good cleaning solvent will work just fine.
     
  3. dangerdan

    dangerdan Junior Member

    922
    26
    0
    Works great , thats all I use. Make sure threads are clean

    :):)
     
  4. 01dynaglide

    01dynaglide Junior Member

    920
    26
    0
    A wire brush will do the job everytime.
     
  5. Fourdogs

    Fourdogs Junior Member

    805
    28
    3
    Thanks guys..I can't believe I didn't think of that ..I got a Dremel Tool with a wire brush attachment..tried it and ..Great outcome...Again thank you guys.
     
  6. Dr. Dolittle

    Dr. Dolittle Experienced Member Staff Member Moderator Contributor

    6,399
    108
    24
    That Dremel is just about the greatest thing ever invented!
     
  7. Apyle

    Apyle Junior Member

    540
    26
    0
    I'd be lost, with very dull a faded chrome, without my dremel. :newsmile01: