New member JD from TN.

Discussion in 'New Member Introduction' started by jd4hd1, Aug 17, 2014.

  1. jd4hd1

    jd4hd1 New Member

    2
    0
    0
    I'm JD, I now ride a 1986 fltc, its an old liberty edition that I restored and upgraded. I joined this group to see if I could connect with some guru's that could let me know what was needed to upgrade the trap door and clutch cover system on my bike to the 87' up style. I've heard all sorts of rumors but haven't been able to talk with anyone who has actually done it. I have bought a trap door from an 88 model and the ball ramp set up, a clutch cable, the outer cover but what im still unsure of is the push rod??? and whatever else??? I could spend hours measuring and adjusting and figuring it out or I could just put the pride aside and ask for help... I have searched exhaustively on the internet for kits or info but no dice... So who has some info for this old knucklebuster...
     
  2. vallan14

    vallan14 New Member

    4
    0
    0
    Welcome to the club :)
     
  3. Bodeen

    Bodeen Well-Known Member Staff Member Moderator Contributor

    4,407
    73
    153
    Glad to have you aboard! :ws:rider
    From Central Florida.
     
  4. tourbox

    tourbox Senior Member

    1,456
    68
    86
    Welcome from So. Texas.
    tourbox
     
  5. fin_676

    fin_676 Experienced Member Staff Member Moderator Contributor

    5,440
    133
    209
    welcome to the forum

    Brian
     
  6. dbmg

    dbmg Experienced Member

    5,800
    153
    320
    :good
    Welcome from Pittsburgh, Pa.
     
  7. Jeff Klarich

    Jeff Klarich Well-Known Member Contributor

    3,877
    103
    334
    :wce From the Rock Mountains.
     
  8. Joyflyin

    Joyflyin Experienced Member Staff Member Moderator

    5,458
    133
    129
    Welcome aboard, glad to have you here. :ws