need to move the bars back

Discussion in 'Sportster Models' started by darkdrakon, Nov 20, 2007.

  1. darkdrakon

    darkdrakon Member

    18
    11
    0
    after adding forward controls I need to move my bars back about 2" would risers do the trick? and what would be the best ones to use? Thanx :D
     
  2. glider

    glider Veteran Member

    25,464
    108
    43
    Have you tried to loosen the clamp and rotate them back a bit with what you have now?

    Risers would do it if you use the set back or curved ones. Bars of a different type (pullbacks) would do it also.

    Just be sure the cables/wires will reach with what ever choice you make.
     
  3. darkdrakon

    darkdrakon Member

    18
    11
    0
    thats what I am trying to determine just rotating the bars wont do it :no ... and the only real hang up in the front brake line, not a lot of hose to play with. so I am thinking pull back risers I need about 2" to be comfortable but not sure which ones I can use without replacing anything.
     
  4. glider

    glider Veteran Member

    25,464
    108
    43