Need some help please

Discussion in 'Electrical' started by spawnxx2k, Aug 29, 2011.

  1. spawnxx2k

    spawnxx2k New Member

    2
    0
    0
    Hi all! I have a 92 hd sportster xl1200. I recently bought chrome housing and new controls. I got the new controls off of a 98 HD 1200s. My problem is I cant seem to figure out the right turn and front brake switch. My 92 has 7 wires from each control side the 98 has 6. I dont know what is the extra wire and where it goes.
    Everything seems to be working as far as run/stop, start, high and low beam I have the wiring diagram for each but im doing something wrong. Here are the wires.

    98 1200c
    RIGHT SIDE
    Front Brake -----red/yellow and white/black
    Starter Switch---black/red and white/black
    Stop/Run---------
    Right Turn--------orange/white and white/brown
    LEFT SIDE
    High/Low--------blue and yellow and white
    Horn -------------orange/white and yellow/black
    Left turn---------white/purple and ?
    93 1200XL
    RIGHT SIDE
    Front Brake------red and orange
    Starter Switch--black and white
    Stop/Run -------gray
    Right Turn-------brown and green
    LEFT SIDE
    High/Low-------blue and yellow and white
    Horn-------------orange and black
    Left Turn--------green and purple
     

    Attached Files:

  2. HDDon

    HDDon Experienced Member Contributor Retired Moderators

    5,456
    133
    196
    Hoople is our resident guru on electrical problems.
     
  3. spawnxx2k

    spawnxx2k New Member

    2
    0
    0
  4. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    If Hopple can not figure it out it aint broken:s