Need some help/advice

I currently have a toe shifter, of which I'm adding a heel shifter to. The previous owner had a cap on the stud. How does this cap come off?

Thanks

 

There should be a recessed allen head screw holding it on.

 

Set screw with loctite probably on the threads:s

 

When set screw is found, if difficult to remove try heating cover with a hair dryer to loosen loctite....
Heel/Toe Shifter Shaft Cover | Genuine Motor Accessories | Harley-Davidson USA

 

And usually the set screw is facing downward so it doesn't show.

 

It took me all of 15 mins, start to finish...heck even a Caveman (or a mechanical incompetent like me) could do it..

Thanks

 

I'm one of those that prefers the toe shift only. There should be a small hex set screw on the under side. At least that's the way mine is.