Need help

Discussion in 'Touring Models' started by stevec314, Aug 8, 2008.

  1. stevec314

    stevec314 Member

    87
    16
    0
    Ok guys the two mettal things that come out of the throttle housing appear to be a little loose. I know that this is not a good thing. I have looked in the service manual but can't seem to find it. how do I tighten it? I know that other types of bikes have a Jam nut on the outside of the housing but I do not see that on mine ( 07 Ultra ).

    Thanks

    Steve
     
  2. glider

    glider Veteran Member

    25,464
    108
    44
    Steve

    If you are referring to the cable elbows just above the adjuster on the throttle cables , they are always loose. There is a spring setup on the end of the elbow that is in the housing and if you put a thin bladed screwdriver between the housing and the lip on the elbow, they pop right out then. They are all like that, nothing to worry about.
     
  3. stevec314

    stevec314 Member

    87
    16
    0
    Thanks I appreciate it!!