Need help.

Discussion in 'Dyna Models' started by diver4life, May 12, 2011.

  1. diver4life

    diver4life Active Member

    118
    0
    0
    Does anybody know how to remove the fork slider cover? It have like a small notch but I dont know if i can remove it with a screwdriver, Any ideas?
     
  2. Hoople

    Hoople Account Removed

    7,198
    0
    34
    I took a 5/16" wooden dowel and grind a blunt tip on one end. Then just tap it off with a small hammer. If you use something metal your bound to scratch it.
     
  3. diver4life

    diver4life Active Member

    118
    0
    0
    the wood dowel inside the notch or against the lip of the cap?

    I did it! Thanks!
     
    Last edited by a moderator: May 12, 2011
  4. Breeze3at

    Breeze3at Well-Known Member

    4,645
    83
    124
    Not only a master of all things electrical, Hoople can do mechanical too. :newsmile108:
     
  5. glider

    glider Veteran Member

    25,464
    108
    44

    Much easier described as "Hoop can do anything!":D
     
  6. Hoople

    Hoople Account Removed

    7,198
    0
    34
    Thanks, but before I actually figured it out, I scratched my own cover using a punch.! I am actually better at fixing other peoples problems than my own. :)