Need drive belt advice.

[Milan]

Need to change my drive belt. Missing teeth. I have a 132 tooth belt, 32 tooth trans. sprocket and a 65 tooth rear sprocket. I'm thinking of replacing with 136 tooth belt and 36 tooth trans sprocket to get lower RPM at top end. Do I need to go with a 70 tooth rear sprocket? Would going from 132 to 136 be too much? Would 134 be better?
Thanks Milan

 

[Doc 1]

Need to change my drive belt. Missing teeth. I have a 132 tooth belt, 32 tooth trans. sprocket and a 65 tooth rear sprocket. I'm thinking of replacing with 136 tooth belt and 36 tooth trans sprocket to get lower RPM at top end. Do I need to go with a 70 tooth rear sprocket? Would going from 132 to 136 be too much? Would 134 be better?
Thanks Milan

Your allready geared high with the 32/65 if you changed the trany to a 36 you would be changing the final drive by 24% higher.....some one would have to push you to get you rolling in 1st gear so it wouldn't stall on you. I think a one or two tooth jump would be more than enough for highway speeds.

 

[Milan]

Thanks for the reply. I appreciate the advice.
Milan:breakdance