Name is Brian. Own a 2006 FXDCI

Discussion in 'New Member Introduction' started by sumandbri, Aug 4, 2016.

  1. sumandbri

    sumandbri New Member

    1
    1
    0
    I am having trouble with the ignition. Bike running good and then bam nothing. Try to start no power in the ignition on position. But there is power in the ACC position. When you turn the ignition to on the needle moves a little bit. Battery @ 12.5 v. Checked all fuses and wires to make sure nothing grounded out. Baught new system and starter relays. New ignition switch still nothing. Some one please help.
     
  2. tourbox

    tourbox Senior Member

    1,310
    68
    54
    Welcome from So. Texas. How did you test the fuses etc., visually or with a meter/test light?? What do you mean by No Power with ign. on? Is there head light,tail light, etc. with Ign. on? More info would help. I would start by checking for voltage to and thru the Ign. switch first and go from there.
    tourbox
     
  3. Joyflyin

    Joyflyin Experienced Member Staff Member Moderator

    5,324
    118
    93
    Welcome aboard, glad to have you here.
     
  4. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    Welcome to The Forum
     
  5. Jeff Klarich

    Jeff Klarich Well-Known Member Contributor

    3,597
    103
    296
    Welcome to HDT from the Rocky Mountains.
     
  6. Harttoo

    Harttoo Senior Member

    1,107
    68
    80
    Welcome from Wisconsin.
     
  7. geezer

    geezer Senior Member Contributor

    1,623
    68
    52
    Welcome aboard from Canada. :)
     
  8. HDDon

    HDDon Experienced Member Contributor Retired Moderators

    5,456
    133
    196
    Welcome to the forum from Suwannee, Fl.
     
  9. fin_676

    fin_676 Experienced Member Staff Member Moderator Contributor

    5,277
    133
    156
    Welcome to the forum from Scotland

    Brian
     
  10. SledDog

    SledDog Senior Member Staff Member Moderator

    1,852
    58
    42
    Welcome!