Motorcycle Innovations Oil Cooler

Discussion in 'Oil' started by Spade5, Oct 28, 2007.

  1. Spade5

    Spade5 Active Member

    236
    26
    0
    Does anyone have any experience with this cooler?

    It is an aluminum body and offers an angle offset for the filter and has a built in thermostat.
     
  2. glider

    glider Veteran Member

    25,464
    108
    43
    Last edited: Oct 28, 2007
  3. surfrider65

    surfrider65 New Member

    1
    11
    0
    Hi, just joined and I have the same question regarding the 'Motorcyle Innovations Bad Boy Oil Cooler'. I've ran AMSOIL since the bike was new, maybe over-kill but I drained it at 500 and 1500 each time replaced with the proper AMSOIL product. I have about 24,000 miles on 'Delila' (oil changed every 5000-6000) and I just started noticing a little more heat coming up from the motor at lights, hence my thoughts of: "maybe it's time to consider an Oil Cooler of some sort". so, any help would be greatly appreciated. I like the Bad Boys' design verses HD/Jagg's product (JP catalog)
     
  4. Sheepdogmarine

    Sheepdogmarine Active Member

    126
    28
    1
    Smitty, thanks for the info. I had the same question he did.
     
  5. Clayvis

    Clayvis Account Removed

    22
    0
    0
    Jagg is no longer making the HD cooler. Call the 800 # for Jagg and ask to speak with Marvin. He will explain it all to you. You might also want to read the article by Donnie Peterson on oil coolers in this months AIM. (American Iron Magazine)
     
  6. bellacoolabilly

    bellacoolabilly Member

    17
    11
    0
    This is the same cooler that I am looking at putting on as well. I looked at the Jagg one that is made and thought that the cooling fins could pick a stone up off the HWY and puncture it causing it to leak. I thought the aluminum body Bad Boy cooler looked more durable. PLus it looks easy to install. I noticed someone had pix of a Jagg cooler that they mounted as on their bike and it looked pretty sharp. Is there any feedback about the Bad Boy cooler?
     
  7. Spade5

    Spade5 Active Member

    236
    26
    0
    I am trying to decide between the Jagg and the HD unit. Does anyone know if a tool bag will fit under the horizontal mounted coolers for either of these.

    I like having my tool bag on the down tubes under the regulator but I cannot tell from the pictures of either of these coolers how much room is under the cooler.

    Also, having never done an oil filter change myself, does either adapter offer an advantage. The HD unit looks like is is flush under the filter and the Jagg looks to be somewhat offset. I am wondering if the HD unit puts it too close to the crank sensor and if the Jagg offset gets it too close to the O2 sensor.
     
  8. bellacoolabilly

    bellacoolabilly Member

    17
    11
    0
    Thanks Smitty. With winter approaching, I won't have to hurry to buy it just yet! HA!
     
  9. formike56

    formike56 Junior Member

    507
    26
    0
    Feuling makes a good oil cooler. Doesn't look like a radiator. Very solid work good, has it's own filter in it along with the stock oil filter. I installed it in a 45 minutes. web site is FEULINGPARTS - OIL PUMP CORP
     
  10. bellacoolabilly

    bellacoolabilly Member

    17
    11
    0
    Thanks for the link Formike56 for that Fueling oil cooler. It looks very durable.