free website stats program Memphis Shades Batwing Fairing for Road King | Harley Davidson Forums

Memphis Shades Batwing Fairing for Road King

Bud White

Well-Known Member
Retired Moderators
Well i bought one and installed it tonight had to wait 1 week to get it but install was pretty easy .. not quite done yet need bolts for windshield i emailed where i ordered it from Zanotti and am waiting to hear back .

But mean while i will get some stainless or chrome bolts

100_0381-1.jpg


ok here she is stock

Start by removing windshield

100_0382-1.jpg


here is the mount kit

100_0384-1.jpg


and the neat fender cover i bought for service

100_0385-1.jpg


100_0386-1.jpg


Install the mount onto the fairing

100_0387-1.jpg


Remove lightbar and turn signals

100_0389-1.jpg


install spacers from hit .. here is only real beef the spacers are nylon and the locks are to . course i don't plan on removing it often the harley ones felt like plastic also

100_0390-1.jpg


Here is Fairing - Windshield

100_0391-1.jpg


100_0392-1.jpg


100_0393-1.jpg


After a pledging

100_0394-1.jpg



Also My bars are higher than stock so they are higher than what would be normal and stick out from behind fairing also .. now i am also thinking about stretching the holes maybe and lifting it little higher but ill wait to ride ..

Also my radio will not fit in stock spot but i got a plan and i think it will work pics later if it does..
 
Looks good Bud! Next are you going to show up with the lowers you showed me?:D
 
I put one on my 04 Fatboy and it added a whole new look to the bike. Only issue was the headlight adjustment. I ended up drilling the holes out on the "quick detach" to raise the shield and my headlight. I do not take it off and on so the nylon tabs are no big deal. I really like mine and it is nice on a cool morning.
 
Ok here we go some more fab work to mount radio

now knowing i would need to cut the brackets so i stopped to pick up a cutting disc arbor my die grinder witht he cutter is out on loan and to hard to get fast.. So Find the arbor 10$ i think not .. off to harbor freight during the work day and Bam a cutter only die grinder with shield 7.99 with disc all ready on it ..

100_0397-1.jpg


Best part as im paying they ask me do you want a warrenty for 2 years for 15$ um no ill pass .:bigsmiley20:

Measure out bracket and mark with the sharpie

100_0398-1.jpg


Leaves some nasty edges

100_0403-1.jpg


Deburr the sides edges and holes

100_0411-1.jpg


Scuff with some Sand paper

Shoot and wait a day to dry

100_0413-1.jpg


Install for test fit and to mark where new holes will go in box

100_0416-1.jpg


100_0418-1.jpg


100_0419-1.jpg


Cover the old holes for now silicone once mounted

100_0420.jpg


100_0422-1.jpg


100_0424-1.jpg


as you can tell by fresh fly gear it was real warm finishing it
not a bad pic for putting on toolbox and running and hopping on it for the selftimer

100_0428-1.jpg
 
Back
Top