Floyd Hoffman
New Member
I have an '86 Electra Glide with an inop left turn signal, front and back. I have swapped bulbs around so I know it is not a bad bulb. This bike has the signal buttons that stay in when pushed and then go off when pushed again. After trouble shooting the switch with my millimeter I determined that it was bad. My local dealer parts man said that H.D. does not make that switch anymore so he ordered one from an after market source. This new switch is the push in and hold type. I disconnected the leads from the old switch and temporarily connected the new one. With power on, the right signals worked, but still no left signals. Do I have another problem or is this push and hold switch not comparable with my bike.