johnkarlfl
Active Member
I lowered my bike. Now the Kickstand is to long, so whats the fix?
kickstand
- Thread starter johnkarlfl
- Start date
J
Jack Klarich
Guest
What kit did you use? J P has some kickstand applications for lowered bikes seems to me H D does too
Hey John, I have the fix for you, if you are lucky and your bike is 1993-2008 or you can order from J&P cycles part #5300420 it is a kickstand angle plate cost $29.99 plus s/h, bolts right behind stock kickstand.
If your bike is 09 or newer then you need to replace the whole kickstand assembley and the only company that sells one at this time is eGlideGoodies (cut and paste link), part #ANT-11-22, cost $124.99 plus s/h.
I have reserched this for about a year now and short of taking your exsisting kickstand and cutting it and welding it back together there is no other way to do it. Should you find a cheaper way please let me know. My bike is a 2009 Electra Glide with a burly slam kit installed and let me tell you it is low.
Hope this helps and good luck.
If your bike is 09 or newer then you need to replace the whole kickstand assembley and the only company that sells one at this time is eGlideGoodies (cut and paste link), part #ANT-11-22, cost $124.99 plus s/h.
I have reserched this for about a year now and short of taking your exsisting kickstand and cutting it and welding it back together there is no other way to do it. Should you find a cheaper way please let me know. My bike is a 2009 Electra Glide with a burly slam kit installed and let me tell you it is low.
Hope this helps and good luck.
johnkarlfl
Active Member
thanks, I think that will do it