Jiffy stand frame stop

Discussion in 'Other Service and Maintenance' started by dangerdan, Sep 27, 2008.

  1. dangerdan

    dangerdan Junior Member

    922
    26
    0
    When the jiffy stand is kicked into the up position its should stop against a rubber bumper. The jiffy stand now slides between the frame and the rubber stop.

    I have checked the manual and found nothing.
    I tried to get close and personell , but my glasses are not strong enough.

    Whats holding it in place ??:D
     
  2. hntwrobin

    hntwrobin Active Member

    236
    26
    0
    The bumper for the kickstand just slides on the frame if you roll it back out it will stop the kickstand. My roadking does this all the time.:s
     
  3. dangerdan

    dangerdan Junior Member

    922
    26
    0
    I tried that , but it still hits the frame after a couple times.
    There has to be a way to make this permanent
     
  4. glider

    glider Veteran Member

    25,464
    108
    43
    Find the proper position and use some contact cement under the bumper when reinstalling it. May be necessary to use a lift or lean the bike against a wall to find the proper placement.
     
  5. dangerdan

    dangerdan Junior Member

    922
    26
    0
    Contact cement ????

    Ok, I will try that, your the man and thanks again