jack shaft starter seal-HELP

Discussion in 'Transmission' started by 79mr79, May 6, 2009.

  1. 79mr79

    79mr79 Member

    12
    11
    0
    New seal does'nt look like old one. I'm not sure which way to put it in. The new seal is what I'm going to call a double lip seal, its from james. I will try to explain- Does the protruding lip face the starter or towards the primary. Hope this makes a little sense. Thanks.
     
  2. STEVE07

    STEVE07 Well-Known Member Staff Member Super Moderators

    4,034
    68
    43
    the protruding lip on any seal should face the side that holds the lubricant.
     
  3. SamF

    SamF Member

    27
    11
    0
    The open side of the seal faces the clutch, there is a service bulletin on this, # M-1161