Intstalled Auto Gem Baby Bullets and now having a little problem.

Discussion in 'Softail Models' started by 05FXST, Dec 19, 2009.

  1. 05FXST

    05FXST Member

    12
    0
    0
    Ok i hooked the power leads and ground leads up to each light and now when i turn either one of the signals on it will blink regularly and then go faster. Whats the deal? Am I supposed to connect the orange and white lead between them? What do I do with it.
     
  2. jettblack

    jettblack Member

    35
    6
    0
    I did the same thing on my bike. You need a load equalizer (because of the low voltage LED's). I used Kuryakyn part #4810 worked like a charm and very easy to install.
     
  3. NEWHD74FAN

    NEWHD74FAN Experienced Member Retired Moderators

    8,176
    98
    16
    Jettblack has you covered, a load equalizer is needed...common problem as as an LED draws 1/100 the current of a lamp (essentially a filiment heater element). Not enough current draw for the TSM/TSSM to work turn signals properly.
     
  4. 05FXST

    05FXST Member

    12
    0
    0
    These are not LEDs. Also this is an 05 Standard
     
  5. NEWHD74FAN

    NEWHD74FAN Experienced Member Retired Moderators

    8,176
    98
    16
    05FXST, listed below is a link to the website...if not LED...what is the model # of the ones you have?

    Baby Bullets - Products
     
  6. 05FXST

    05FXST Member

    12
    0
    0
    AG330-526 is the model number. Any help would be awesome. thanks