internal wiring?

Discussion in 'General Harley Davidson Topic' started by carter, May 19, 2008.

  1. carter

    carter Member

    13
    11
    0
    Hi! i'm putting street slammers on my 08 nightrain. I have it all apart but i'm having problems with getting the wire pins apart to internally wire the bars. If anyone could give me some advice it would be appreciated. I can't get the orange wire holder out of the grey outer housing. thanx
     
  2. carter

    carter Member

    13
    11
    0
    I can't seem to get the wires out of the grey coupling housing
     
  3. glider

    glider Veteran Member

    25,464
    108
    44
    Maybe you can see the location of the release in this pic.It's a real pain to do. I found using a safety pin straightened out and probing for the release worked for me.

    [​IMG]
     
  4. carter

    carter Member

    13
    11
    0
    I'm actually having the problem with the wiring harness for lights,signals,horn, etc. So I can feed them down. THANX !
     
  5. glider

    glider Veteran Member

    25,464
    108
    44
    They should have similar release tangs as that pic.
     
  6. carter

    carter Member

    13
    11
    0
    Just want to say thanx for the advice. I found that one of my daughters bobby pins slid in perfect and the pins slid out. Now I know.Slammers are on everything works and it looks great. Once again THANX!
     
  7. glider

    glider Veteran Member

    25,464
    108
    44
    Glad it worked out for you. They can be a real pain sometimes.
     
  8. glider

    glider Veteran Member

    25,464
    108
    44
    Yeah, it would be nice to see the before and after when members change things on the bikes.