Installing 2/1 pipes on 2009 street glide

Discussion in 'Engine, Fuel and Exhaust' started by STREETGLIDE2010, Jul 18, 2010.

  1. STREETGLIDE2010

    STREETGLIDE2010 New Member

    1
    0
    0
    Im trying to install 2010 2into 1 pipes on my 2009 street glide and the o2 sensers have different plugs does any one know how to fix this
     
  2. ultrat

    ultrat Senior Member Contributor

    1,315
    0
    1
    Now in plumbing we have adapters threads on inside & outside, id check for an adapter....+ welcome to the forum.......
     
  3. Redfish-Joe

    Redfish-Joe Senior Member

    2,307
    48
    10
    If you go with a TFI then you can just plug the bungs. The kit will have resistors to plug into the O2 sensor wire to keep from throwing codes.
     
  4. Iceman24

    Iceman24 Well-Known Member

    3,224
    48
    13
    My thoughts exactly b/c you'll probably want a means to self-tune the bike w/new exhaust system & also a good time to do the stage 1 air to really open it up. Don't want the engine running too lean...
     
  5. glyd-n

    glyd-n Junior Member

    406
    26
    1
    Just out of curiosity, why are you putting the 2010 pipe on the 09? The 2010 pipes have the cat converters in the head pipes, which are more restrictive and create more heat. I think it will do more bad than good. Just my opinion..