Injection mapping

Discussion in 'Touring Models' started by johnw, Jul 8, 2011.

  1. johnw

    johnw Member

    6
    0
    0
    Hi All again.
    2003 FLHRCI, Road king classic, injected.
    I installed the factory exhaust back to 100% stock.
    The intake breather is a Harley stage 1 kit.
    My local dealership told me I do NOT have to re-map the injection back to stock and the breather can stay the same. It seems to run normal but I dont know if this is accurate information? Thank you.
     
  2. glider

    glider Veteran Member

    25,464
    108
    44
    Considering that the stock map is very lean, your download that you had installed is only about 5% richer than the stock map and would probably end up being advantageous for the engine.
     
  3. Hoople

    Hoople Account Removed

    7,198
    0
    34
    If you originally got to a Stage 1 A/F map via a dealership canned download,, I would not worry about it.

    The current E10 fuels require another .3 of 1 point to the rich side anyway so your probably now right in the Sweet Spot. :)

    You probably have an Honest dealership because he COULD have sold you a $100 de-tune.
     
  4. johnw

    johnw Member

    6
    0
    0
    Thanks Glider, Hoople, Was hoping to hear that. Have A Great Day.