ignition lock install on a 1999 UC

Discussion in 'Touring Models' started by wannaride, Jan 15, 2011.

  1. wannaride

    wannaride Active Member

    259
    28
    2
    Got the lock out no problem but to get it back in, in looks like the tab has to be pushed in but am having a hard time. There is the tab that you push in before you twist it past the lock position & then there is the tab that is the guide that makes you have to push down on the switch to go from all the positions & holds the lock in the switch. The tab that is circled will only go in when the releasr tab is pushed in & as soon as you let go of the circled tab it goes back out. The manual does not say much on those.
    [​IMG]
    [​IMG]

    Here are a couple of pics from my painted inner.

    [​IMG]

    [​IMG]

    Thanks for any help

    Toby
     
  2. wannaride

    wannaride Active Member

    259
    28
    2
    Thanks, I got it. Forgot that the key moved CCW from unlock when you push in the release button pulls the tab back. Time to try to finish it up, I want to ride it to work on Monday.

    Toby
     
  3. wannaride

    wannaride Active Member

    259
    28
    2
    Tank, the only diff between the video & the 99 is the knob position needs to be in access instead of the lock position & the 99 doesn't have that spring. Thanks again.

    Toby