Ign Removal

Discussion in 'Touring Models' started by 95ultra, Aug 5, 2011.

  1. 95ultra

    95ultra Member

    6
    0
    0
    I was just wondering what years would fit a 1995 ultra. thanks
     
  2. 95ultra

    95ultra Member

    6
    0
    0
    This is what the problem is . I have a 1995 Ultra classic. I can remove the top of the switch but I'm not sure how to get the electriaL part out from the faring . do I need to remove the outer faring and the inner also. all I have read only looks at the top part .
    any help I would be greatful
     
  3. glider

    glider Veteran Member

    25,464
    108
    44
  4. 95ultra

    95ultra Member

    6
    0
    0
    read this one only does the top end not getting it out of the faring
    thanks
     
  5. 95ultra

    95ultra Member

    6
    0
    0
    OK got it out

    this is what I had to do .
    1 take the top part of switch off.
    2 take front fairing off
    3remove raido
    4 removeraido bracket
    5 remove clutch handel clamp
    6 remove brake handel clamp
    7 remove clamps for handel bars then pick up inner faring over switch lean it forward
    the ignition switch is looking at you unplug cable and remove :bigsmiley23:
     
  6. 95ultra

    95ultra Member

    6
    0
    0
    Re: ignition switch

    I have foound out that a 1993 to 2001 on the ultras are the same hope this helps others