IAT Sensor trouble code

Discussion in 'Electrical' started by dynalarry, Apr 21, 2008.

  1. dynalarry

    dynalarry Member

    9
    11
    0
    I've been getting trouble code PO113 (IAT sensor voltage open/high EFI) on my 2006 Superglide. I replaced the sensor and cleared the code but it returned. Any ideas on what else could be tripping this code? By the way, the bike runs great, but the check engine light is getting on my nerves. thanks....
     
  2. glider

    glider Veteran Member

    25,464
    108
    44
    Have you checked the power and ground for that sensor?
     
  3. dynalarry

    dynalarry Member

    9
    11
    0
    I haven't checked the power and ground for the sensor, what does that entail? thanks, Glider...
     
  4. glider

    glider Veteran Member

    25,464
    108
    44
    It would require a volt meter and measure the voltage at the plug of the IAT, should be around 5 volts, and also check for ground. Check for the voltage first with the key on, then ground.