I am doing a tw21 cam install replacement on my 05 dyna.

Discussion in 'Dyna Models' started by dyna_mike, Dec 24, 2012.

  1. dyna_mike

    dyna_mike New Member

    2
    0
    0
    Going with an Andrews tw21 cam, with the SE roller chain oil pump/chain tensioner conversion kit. I hate that the secondary drive does not incorporate a roller chain, but whatever...I already bought it.

    Would anyone recommend replacing the OEM hydraulic tappets/lifters?

    Also I'm kicking around the idea of going with ULTIMA 1.675 ratio ROLLER ROCKER ARMS. I'm told they are loud. Anyone had any experience with these?

    Also considering Fueling hydraulic roller lifters for this build.

    Should I or would I be wasting hard earned cash?

    Anybody?
     
  2. Bodeen

    Bodeen Well-Known Member Staff Member Moderator Contributor

    4,316
    73
    130
    How many miles on the bike? Depending on that, I would recommend changing the lifters. Cheap insurance and you are already in there.
    Cant speak about the Ultima rockers or the Fueling lifters.

    Welcome to the Forum and Merry Christmas
     
  3. dyna_mike

    dyna_mike New Member

    2
    0
    0
    Fresh top end with a 95 kit but it has 45K.
     
  4. TQuentin1

    TQuentin1 Well-Known Member Staff Member Moderator

    4,633
    68
    99
    Check this out:

    TQ's Engine Build

    Harley Davidson Community

    TQ