high beams on with spot loghts

Discussion in 'Electrical' started by patrickcarr, Jul 28, 2011.

  1. patrickcarr

    patrickcarr Member

    50
    16
    0
    have a 2009 fhlxse with hd passing lamps. i would like to wire it up so the passing lamps stay on once switched to high beam. it has a two bulb center light low beam and high beam. any ideas?
     
  2. TripleJ

    TripleJ Senior Member

    1,081
    48
    8
    Give this a look.

    Harley Davidson Community

    On my Heritage I simply wired them into the accessory line for the fender tip lights.
     
  3. purplehazeultra

    purplehazeultra Active Member

    111
    0
    1
    I live in PA. and it won't pass Pa. inspection if you wire it that way.
    Just say for a FYI. I would check with you mechanic.
     
  4. glider

    glider Veteran Member

    25,464
    108
    44
    You could always add a toggle switch somewhere on the bike to disable this feature for state inspections.
     
  5. purplehazeultra

    purplehazeultra Active Member

    111
    0
    1
    How true old wise one!!!!
     
  6. RibEye

    RibEye Junior Member Contributor

    973
    48
    45
    I wish it was legal to make them briefly wig-wag if you hit the horn. Sometimes I feel so invisible. No matter how vigilant we are, there are frequently brief moments when, if a driver steps on his gas, there is nothing we can do but meet our maker. I'm pretty liberal with my 140db air horn, but so many times I don't even get their attention to distract from their stinking phone.

    I'm a design engineer. I can work up a superb wig-wag/horn circuit. However, I don't want to get cited for it, which would likely happen in fairly short order.

    Enjoy,
    Rich P
     
  7. dbmg

    dbmg Experienced Member

    5,800
    153
    318
    "The best defense is a good offense".