Help!!Block connectors/Electrical

Discussion in 'General Harley Davidson Topic' started by 1126stans, Feb 21, 2008.

  1. 1126stans

    1126stans New Member

    2
    11
    0
    Hi
    I'm new to the forum and I'm changing my Sportster 883XL into a Wide Glide Front End and I need to take off the standard top mount Head lamp. I've two block connectors that go to the hand controls and they come out of the big hole in the head lamp shell the other connectors come from the wireing loom and come into the head lamp shell through a small hole.

    Does anyone know how I can get these block connectors apart or out of the hole (as the connectors are bigger than the hole)?

    These are six pin connectors.

    HELP needed in :WALES

    thanks
    Stan
     
  2. glider

    glider Veteran Member

    25,464
    108
    43
    You should familiarize yourself with the electrical section of the tech forum for all the answers to many questions. Look at the bottom of this post to find your way to that tech section.
    You can also use the search function to find things too.

    This post should help for now.

    Wiring Connectors - Harley Davidson Community

    There's also other posts with the different type of connectors.
     
  3. 1126stans

    1126stans New Member

    2
    11
    0
    Hi glider thanks for your help its in bits now .