heat demons grip warmers

Discussion in 'Dyna Models' started by Banjo bob, Jan 19, 2010.

  1. Banjo bob

    Banjo bob Member

    28
    11
    0
    Unfortunatly living in England, it can get a bit cold, and I'm thinking of fitting a set of heated handle bar grips to my 09 Fat bob.

    my question is:
    Has anybody fitted a set of Heat Demons Grip Warmers to a fat bob with standard bars, as I need to know if you can feed the wires through the bars as they already have the the switch looms in them, and space might be at a premium

    Any thoughts
     
  2. BOBFLHTC

    BOBFLHTC Active Member

    273
    0
    0
    I've used heated grips from HOT GRIPS-heated grips, hand warmers, grip warmers for about 15 years on 3 or 4 different bikes. I've had them on my current ride for 10 years. They are reasonably priced and I've never had a problem. They have a hot and warm setting. Its nice to be able to switch them on while I am riding if it gets cool.
     
  3. JeromeyS

    JeromeyS Member

    18
    11
    0
    I internally wired my heated HD grips without any problems on my 03 Wide Glide with 1" bars, with the switch wiring internal as well. They died within the first year and my dealer never told me of the recall on them. So this year I am going to install the Heat Demon's. I have read alot of good reviews on them. I am thinking on replacing the bars with the 1 1/4" mini apes as well.
     
  4. NEWHD74FAN

    NEWHD74FAN Experienced Member Retired Moderators

    8,176
    98
    16