Handle bar help.

Discussion in 'Touring Models' started by Jeff Klarich, Feb 11, 2012.

  1. Jeff Klarich

    Jeff Klarich Well-Known Member Contributor

    3,716
    103
    312
    I'm thinking about putting a set of Harley 12 inch ape bars on my 05 ultra classic, My question is i'm pretty handy with a wrench but am I getting in over my head? Looks like a pretty big job.

    Any help with be great.

    Lawman.
     
  2. HDDon

    HDDon Experienced Member Contributor Retired Moderators

    5,479
    133
    199
    If you have a manual you should not have any problems. Make sure you put the spacer that is called for at the front break switch.
     
  3. dbmg

    dbmg Experienced Member

    5,800
    153
    320
  4. Jack Klarich

    Jack Klarich Guest

    Good video Bernie, I see now why the Stealers want so much money to do the swap, it is alot of work, Thanks for posting that link, Lawman is my younger brother back in Minnesota BRRRRR its cold:p
     
  5. HDDon

    HDDon Experienced Member Contributor Retired Moderators

    5,479
    133
    199
  6. Jeff Klarich

    Jeff Klarich Well-Known Member Contributor

    3,716
    103
    312
    Thanks for the info and the video helped me alot, looks like i'll be looking for some help!

    Thanks again,

    Lawman.
     
  7. dbmg

    dbmg Experienced Member

    5,800
    153
    320
    Hi Jacks brother.......:s
    Great to have you here...
    Is Minnesota where there is Winter and July as the only seasons??????:small3d031:
     
  8. HDDon

    HDDon Experienced Member Contributor Retired Moderators

    5,479
    133
    199
    Don't forget Fall, Aug 14-Sept 3.
     
  9. dbmg

    dbmg Experienced Member

    5,800
    153
    320
    Oh yeh...:s
     
  10. Jeff Klarich

    Jeff Klarich Well-Known Member Contributor

    3,716
    103
    312
    That's about it!!! although this winter has been great, no snow on the ground in Feb.