Grease fittings

Discussion in 'Softail Models' started by markols1, Jan 17, 2012.

  1. markols1

    markols1 Member

    13
    0
    0
    Hi all Marc here form OZ how are you all going? Question where are all the grease fittings on a 2010 fatty cheers summers here time to ride.:panic
     
    Last edited by a moderator: Jan 17, 2012
  2. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    If you have a grease fitting it will be on the neck, turn the wheel to the right and have a look
     
  3. glider

    glider Veteran Member

    25,464
    108
    44
    Generally it's only the baggers that have the grease fitting because the tubes of the frame on the other models are not close ended at the neck like baggers are so you would be filling the entire frame with grease. There's a possibility this may have changed on the later models but not sure. If you have a fitting there from the factory, then they have changed the greasing applications.
     
  4. geezer

    geezer Senior Member Contributor

    1,623
    68
    52
    On my Heritage the fitting is on the right side of the steering neck. It's easy to see if the wheel is all the way to the left.
     
  5. NYSDEUCERIDER

    NYSDEUCERIDER Active Member

    143
    0
    2
    My 2007 Deuce has one on the right side of the neck also.
     
  6. turnup

    turnup Member

    40
    16
    0
    '01 softail has a grease fitting in the neck
     
  7. markols1

    markols1 Member

    13
    0
    0
    Hi all found that one but is there any for the swingarm cheers.
     
  8. Bodeen

    Bodeen Well-Known Member Staff Member Moderator Contributor

    4,316
    73
    130
    no, none on the swingarm.
     
  9. markols1

    markols1 Member

    13
    0
    0
    Thanks everyone put's me at rest now cheers.