Good Morning All!

Discussion in 'New Member Introduction' started by steveselk, Jan 24, 2014.

  1. steveselk

    steveselk New Member

    0
    0
    0
    New member here from TN looking for an answer. I'm looking to buy a 2007 Road King. Keep in mind I'm not a real technical guy but the bike has had a BB kit installed with Master Tune and the current owner claims cams have been replaced as well. I called the Dealership to confirm. Was told that the service had in fact been done but the parts list did not show cam replacement. If one were to have the BB kit installed I would think that cams should be done as well?
    If the current owner has no proof of cam replacement is there any way to tell if the cams have been replaced without a tear down?
     
  2. tourbox

    tourbox Senior Member

    1,311
    68
    54
    Welcome from So. Texas. I don't know of a way to check the cams without removing them. Someone else might. However if it was an HD BB kit it may have come with cams. The dealership can look up the BB p/n# and do a break down of the kit. It will list each part in the kit. You can also do that with an after market kit but with the people who supplied the kit.
    tourbox
     
  3. Dr. Dolittle

    Dr. Dolittle Experienced Member Staff Member Moderator Contributor

    6,399
    108
    24
    Welcome from Woodstock, Georgia, northwest of Atlanta!

    :cheers

    Be sure to take a few minutes to review the forum rules in the link below and your stay here will be long and pleasant!

    Harley Davidson Forums
     
  4. HDDon

    HDDon Experienced Member Contributor Retired Moderators

    5,456
    133
    196
    Welcome to the forum from Suwannee. Like TourBox say's if you get the part#'s for the kit it will be easy to see what came with the kit. That doesn't mean that everything was installed, to know that you would have to see the work order. The dealer should have all records of work done on the bike.
     
  5. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    Welcome to The Forum, I cannot imagine going that far with a build and not changing the cams
     
  6. Joyflyin

    Joyflyin Experienced Member Staff Member Moderator

    5,325
    118
    93
    Welcome aboard, glad to have you here. :ws
     
  7. bikerod

    bikerod Member

    36
    0
    0
    Welcome to the forum
     
  8. fin_676

    fin_676 Experienced Member Staff Member Moderator Contributor

    5,279
    133
    158
    Welcome to the forum

    Brian
     
  9. Bodeen

    Bodeen Well-Known Member Staff Member Moderator Contributor

    4,317
    73
    130
    Glad to have you aboard! :ws:rider
    From Central Florida.
     
  10. SledDog

    SledDog Senior Member Staff Member Moderator

    1,854
    58
    43
    Welcome!