Getting Power, turning over, getting no fire

Discussion in 'Electrical' started by Loud_Mouth, Aug 4, 2016.

  1. Loud_Mouth

    Loud_Mouth New Member

    2
    1
    0
    Was riding last week and doing about 70 when I lost all fire to my bike. While my speed dropped I tried to restart it and nothing. When it reach 20 I popped the clutch it fired but still would not accel and then died off again. I've changed a blown breaker and it fired right up for a good 30 seconds and died again. Getting full power but no fire. ANY HELP? bike is a 2000 1200 sportster
     
  2. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    Have a look here
    [​IMG] #21 is your control module, if it acts up you will have no spark
     
  3. Loud_Mouth

    Loud_Mouth New Member

    2
    1
    0
    Right on. Gonna throw a new one in today.
     
  4. fin_676

    fin_676 Experienced Member Staff Member Moderator Contributor

    5,277
    133
    156
    Common issue with sportsters with the ignition module in the nose cone as the heat they get in there is not good for the electronics

    Brian