Gently layed down my 1995 sportster on right side, did not drop the bike. Noticed crimp in brake line and when I squeezed brake lever fluid squirted out of what I assumed was the crimped part of the line. Replaced brake line and now when I press the brake I get no resistance at all as if it is not working at all....however, I tried pumping the brake to see if the fluid would run down into the actual brake and it does so I assume the line itself is ok. Could I have damaged the master cylinder with a gentle drop (was not riding the bike was trying to push out of hole in my yard and lost balance and dropped the bike. Not sure how to tell what the problem is at this point but fear master cylinder must be the issue but I can't imagine causing that kind of damage. P.S. Lady rider!