Float needle part number??

Discussion in 'Engine, Fuel and Exhaust' started by pike1612, Jun 27, 2010.

Page 1 of 2
  1. pike1612

    pike1612 Member

    34
    0
    0
    Does anyone know the part number for the Keihin/hd cv carb??
     
    pike1612, Jun 27, 2010
    #1
  2. fin_676

    fin_676 Experienced Member Staff Member Moderator Contributor

    5,758
    153
    279
    27886_78a is the part number shown in the parts list for 1993/1994 for sportsters and big twins and i just checked it is still a valid part number and should fit yours

    Brian
     
    fin_676, Jun 27, 2010
    #2
  3. Chopper

    Chopper Senior Member

    1,632
    48
    19
    Don't have a 89 parts book but a 1993 883 model uses a #27489-92 & a 1200 model uses a #27487-92, These would have accelerator pumps on them that the 1989 didn't, sorry all the info I have.
     
    Chopper, Jun 27, 2010
    #3
  4. NEWHD74FAN

    NEWHD74FAN Experienced Member Retired Moderators

    8,191
    98
    19
    NEWHD74FAN, Jun 27, 2010
    #4
  5. Chopper

    Chopper Senior Member

    1,632
    48
    19
    Sorry Pike I gave you the carb number last post, Brian you you covered on the 93 part number, there goes my image again:)
     
    Chopper, Jun 27, 2010
    #5
  6. glider

    glider Veteran Member

    25,464
    108
    49
    Oh Chop! :lolrolling
     
    glider, Jun 27, 2010
    #6
  7. fin_676

    fin_676 Experienced Member Staff Member Moderator Contributor

    5,758
    153
    279
    Aye perhaps chop is working too hard and its the end of the day that he has on the forum so then a wee error every now and then can happen
    so dont give him too much of a hard time boss :s

    Brian
     
    fin_676, Jun 27, 2010
    #7
  8. glider

    glider Veteran Member

    25,464
    108
    49
    NEVER a hard time for the Chop! :D
     
    glider, Jun 27, 2010
    #8
  9. fin_676

    fin_676 Experienced Member Staff Member Moderator Contributor

    5,758
    153
    279
    im pretty sure i have an early cv carb with a -88 part number in the shed and the float needle definatley fitted the 92 softail carb but being the float needle is -78 part number it was perhaps fitted to a lot of different carbs not just the cv

    Brian
     
    fin_676, Jun 27, 2010
    #9
  10. pike1612

    pike1612 Member

    34
    0
    0
    Well,mine is an 89 883 WITH an accelerator pump..the plot thickens...hmmmmm.. lol
     
    pike1612, Jun 27, 2010
    #10
Page 1 of 2