Fault Codes

Discussion in 'Electrical' started by twinnair, Apr 22, 2011.

  1. twinnair

    twinnair Member

    8
    0
    0
    Hi All,

    How do I clear the fault codes on my 2001 FXSTS :coffee
     
  2. TripleJ

    TripleJ Senior Member

    1,081
    48
    8
    I found this post by Hoople for someone else trying to clear the codes, not sure if it worked out or not.

    Steps:
    Disarm alarm if so equipped.
    Run/Off switch to OFF
    Ignition Key: ON,OFF,ON,OFF,ON (and leave ON)

    Press LEFT turn signal switch TWICE. Wait for 1 or 2 flashes..(either 1 or 2 is OK)

    Press RIGHT turn signal switch ONCE => turn signal will flash 1 time
    Press RIGHT turn signal switch ONCE => turn signal flashes 2 times

    Press RIGHT turn Signal switch ONCE => turn signals flash 3 times

    Press LEFT turn signal switch ONCE. TROUBLE CODES WILL NOW BE DISPLAYED (stream)

    TO CLEAR ANY CODES,,,=> PRESS & HOLD LEFT signal switch for 5 seconds. => turn
    signal will now flash twice to confirm memory is clear.

    Turn ignition OFF.

    If this does not work I believe you will have to wait for 50 on/off cycles of the ignition or have the dealer clear the code with their scan tool.
     
  3. glider

    glider Veteran Member

    25,464
    108
    44