Ez-Just screw cv carb

Discussion in 'General Harley Davidson Topic' started by Wtlj, Aug 21, 2012.

  1. Wtlj

    Wtlj Member

    30
    0
    0
    Anyone using the Ez-just idle mixture screw needle on there CV carb? Is it worth the high cost? For those who have it how often do you reach down and fine tune?
    Terry
     
  2. HDDon

    HDDon Experienced Member Contributor Retired Moderators

    5,456
    133
    196
    I set the idle mixture screw (low speed air jet) on my '94FLSTC back in '95, and have not had to reset it yet.
     
  3. fin_676

    fin_676 Experienced Member Staff Member Moderator Contributor

    5,276
    133
    156
    Once a carb is properly set then it is set and should not need any adjustment the opportunity to fiddle with it easily would likely cause problems

    Brian
     
  4. Bodeen

    Bodeen Well-Known Member Staff Member Moderator Contributor

    4,310
    73
    130
    Not necessary for a good running bike.
     
  5. Jack Klarich

    Jack Klarich Expert Member

    18,544
    153
    399
    IMO it is like in the old days when we had an adjustable main jet on our Bendix carbs, waste of time and money, Agree here set it and run it:s Keep in mind about the high alcohol content of the gas we now have so you need to be sure your carb parts are up to date