Engine Remanufacturing

Discussion in 'Engine, Fuel and Exhaust' started by hogman99, Jun 26, 2009.

  1. hogman99

    hogman99 New Member

    1
    11
    0
    I have a 1993 FLHS and the stock engine is ruined and I'm considering the Harley Reman program. Since I currently have a carburetor is it possible to upgrade to fuel injection during this process and if so, what would be involved?
     
  2. Bud White

    Bud White Well-Known Member Retired Moderators

    3,270
    48
    2
    harley wont do it but could .. yes if theres a aftermarket system for the engine .. whats involved a lot of $$$$$ a computer a wireing harness at least to go with the injection setup .. a kit would have it all but $$$$
     
  3. glider

    glider Veteran Member

    25,464
    108
    44
    There's a reman program for the EVO engines but as Bud said , the cost of switching over to the FI isn't worth the expense. Sensors, ECM and a host of other parts like wiring harnesses, fuel pump, different tank, lines etc would all have to be changed as well as the throttle body, intake and on and on.
     
  4. NEWHD74FAN

    NEWHD74FAN Experienced Member Retired Moderators

    8,176
    98
    16
    As Hobbit says, aftermarket has tons of support products for carb equipment, easier to tune and get right the first time. EFI is more complex and much more difficult to get it dialed in, given the same amount of money and effort.
     
  5. hntwrobin

    hntwrobin Active Member

    236
    26
    0
    Harley's reman program is prettty good. I would check out some of the other engines out there though for similar money you can get a bigger EVO motor if you want. Changing to fuel injection= big$$$$:20:
     
  6. whatyardwork

    whatyardwork Banned

    829
    0
    4
    Anyone know how much to reman the EVO through Harley?I see the engines in the book, but at $3900.00 for the black and chrome.If thats the price you could buy a 110" Revtech for $500 more and sell your old motor.
     
  7. hntwrobin

    hntwrobin Active Member

    236
    26
    0
    It was around $2300 last I knew
     
  8. whatyardwork

    whatyardwork Banned

    829
    0
    4
    Thanks Biglew.I was secretly hoping it was more to justify the 110"
     
  9. shaker

    shaker Active Member

    168
    26
    0
    Shipping is included in the cost.

    Prices are U.S. MSRP and include Con-Way® shipping to and from the Harley-Davidson Powertrain Operations Facility - Capitol Drive in Wauwatosa, Wisconsin.

    Labor costs and any required gaskets/lubricants required to remove and re-install engine are not included. See dealer for details.
     
  10. glider

    glider Veteran Member

    25,464
    108
    44